• District 5 Warehouse - 1 kpl. Terrain SF

Symbol: H00032
129.00
szt. Do przechowalni
Wysyłka w ciągu 24 godziny
Cena przesyłki 11.99
Odbiór osobisty 0
InPost Paczkomaty 24/7 czas dostawy: 1-2 dni robocze 11.99
Kurier Inpost 15
Dostępność 1 szt.

District 5 Warehouse - 1 kpl.

-

Model z HDF 

Do sklejenia i pomalowania

Zestaw nie zawiera farb i kleju

-

Dimensions of the Disctrict 5 Warehouse are standard for District 5 range.
Length: 34cm / 13"
Width: 25cm / 10"
Height: 16cm / 6,5"

The width of the hall is equal to the length of one District 5 Apartment or two District 5 Guardhouses.
The sides are made using short walls which are interchangeable with short District 5 Walls.

The District 5 Warehouse can be assembled in shorter / longer version using walls from different Micro Art Studio kits or with smaller amount of the ones included. It has four wall sections with small entrance for S1 and S2 silhouette models and two wall sections with wide entrance that is big enough for everything up to S4.

The main gates are 10cm / 4" high and 8cm / 3,5" wide. Any Infinity Silhouette will fit in them when they are fully open.They're movable and can be opened as wide as you wish. Ground and first floor walkways, as well as two ladders, are in the set. The first floor walkway is wide enough to fit a 40mm base and it's threshold is high enoigh to give Total Cover to prone models. The inner ground floor supports are bulky enough to give Partial Cover to S2 models even if the District 5 Warehouse is empty. The outer supports can give Partial Cover to S2 and fit the District 5 Staircase.

The roof of the District 5 Warehouse is wide enough to fit Airborne Deployment. It's divided into sections which allow to scale the building ang give an option lift just a section of the roof when moving miniatures inside. Each District 5 Warehouse set contains two roof sections with hatches. The windows on the roof can be pushed out to allow to draw LoF through them.
 
This model is delivered as a pack, unassembled and unpainted.
The parts of the model are designed to slot together in a way that allows for a quick and
easy assembly. It may be necessary to glue some parts of the model - use PVA (white) glue.
The District 5 Warehouse model is cut from HDF panels of 3mm thickness.

Attention: Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out.

Nie ma jeszcze komentarzy ani ocen dla tego produktu.
  • Oceń

Jakość
Funkcjonalność
Cena
Podpis
Opinia
Podpis
E-mail
Zadaj pytanie